 |
 |
 |
 |
 |
 |
||
 |
 |
 |
 |
 |
| 5 | 1/1 | 返回列表 |
| 查看: 1629 | 回復: 8 | ||
| 當前只顯示滿足指定條件的回帖，點擊這里查看本話題的所有回帖 | ||
121100220捐助貴賓 (初入文壇)
|
[求助]
ANSYS 生死單元加載時間問題 已有1人參與
|
|
|
求助論壇大神，小弟最近在做增材制造溫度場的仿真，用到ANSYS生死單元功能，在運行過程中遇到一個關于加載時間的問題。主要問題就是在執行*DO循環時一直報錯“present time is equal or less than previous time”。自己實在找不到問題在哪，懇請論壇大神出手相助，幫忙看一下問題出在哪，小弟不勝感激。APDL代碼如下: /CONFIG,NRES,40000 LTH_MD=0.06 ！模具長度 LTH_E=0.001 ！單元長度 NA=6 ！層數 THICC=0.000125 ！單層厚 THICK=0.01 ！模具厚度 THICA=THICC*NA ！鋪層厚度 T_I=0.5 ！ 時間步 YXRZ=16 ！有效熱載長度 DERTAX=5 ！鋪放步 hflux_cons=88541 ！熱流密度 /PREP7 ET,1,13,4 ET,1,13,4 ！-----------------------------材料熱參數--------------------------------- MPTEMP,1,0,50,100,150,200,250$MPTEMP,7,300,350,400,600 MPDATA,DENS,1,1,1601,1598,1593,1586,1575,1563 MPDATA,DENS,1,7,1551,1537,1524,1472 MPDATA,C,1,1,800,930,1040,1260,1300,1400 MPDATA,C,1,7,1550,1650,1700,1900 MPDATA,KXX,1,1,3.5,4.6,5.1,5.9,5.9,6.1 MPDATA,KXX,1,7,6.7,6.8,7,7.8 MPDATA,KYY,1,1,0.42,0.52,0.6,0.7,0.7,0.7 MPDATA,KYY,1,7,0.75,0.68,0.65,0.53 MPTEMP,1,0,50,100,150,200,250,$MPTEMP,7,300,330,343,350,400,600 MPDATA,EX,1,1,128e9,128e9,128e9,128e9,128e9,128e9 MPDATA,EX,1,7,128e9,128e9,128e9,128e9,128e9,128e9 MPDATA,EY,1,1,11E9,11E9,11E9,11E9,11E9,11E9 MPDATA,EY,1,7,11E9,11E9,1E-6,1E-6,1E-6,1E-6 MPDATA,EZ,1,1,11E9,11E9,11E9,11E9,11E9,11E9 MPDATA,EZ,1,7,11E9,11E9,11E9,11E9,11E9,11E9 MPDATA,NUXY,1,1,0.28,0.28,0.28,0.28,0.28,0.28 MPDATA,NUXY,1,7,0.28,0.28,1E-9,1E-9,1E-9,1E-9,1E-9 MPDATA,NUXZ,1,1,1E-9,1E-9,1E-9,1E-9,1E-9,1E-9 MPDATA,NUXZ,1,7,1E-9,1E-9,1E-9,1E-9,1E-9,1E-9 MPDATA,NUYZ,1,1,1E-9,1E-9,1E-9,1E-9,1E-9,1E-9 MPDATA,NUYZ,1,7,1E-9,1E-9,1E-9,1E-9,1E-9,1E-9 MPDATA,GXY,1,1,5.1E9,5.1E9,5.1E9,5.1E9,5.1E9,5.1E9 MPDATA,GXY,1,7,5.1E9,5.1E9,5.1E9,5.1E9,5.1E9,5.1E9 MPTEMP,1,0,50,100,140,143,250 MPTEMP,7,300,330,343,350,400,600 MPDATA,ALPX,1,1,0.6E-6,0.6E-6,0.6E-6,0.6E-6,0.6E-6,0.6E-6 MPDATA,ALPX,1,7,0.6E-6,0.6E-6,0.6E-6,0.6E-6,0.6E-6,0.6E-6 MPDATA,ALPY,1,1,34.3E-6,34.3E-6,34.3E-6,34.3E-6,66.0E-6,66.0E-6 MPDATA,ALPY,1,7,66.0E-6,66.0E-6,1E-30,1E-30,1E-30,1E-30 MPTEMP,1,0,50,100,150,200,250 MPTEMP,7,300,330,343,350,400,600 MPDATA,ENTH,1,1,0.00E+00,7.43E+07,1.57E+08,2.57E+08,3.59E+08,4.69E+08 MPDATA,ENTH,1,7,5.89E+08,6.63E+08,7.31E+08,7.48E+08,8.78E+08,1.44E+09 MP,EX,2.73E9 MP,NUXY,2,0.3 MP,ALPX,2,23E-6 MP,KXX,2,237 MP,C,2,905 MP,DENS,2,2700 ！---------------幾何模型-------------------------- BLC4,0,THICK,LTH_MD,THICA BLC4,0,0,LTH_MD,0.01 AGLUE,ALL ！---------------------------劃分網格------------------------- LSEL,S,LINE,,1,5,2 LESIZE,ALL,,,60,,,,,1 LSEL,S,LINE,,2,4,2 LESIZE,ALL,,,6,,,,,1 LSEL,S,LINE,,9,10,1 LESIZE,ALL,,,10,5,,,,1 ASEL,S,AREA,,1 AATT,1,,1,0 MAT,1 AMESH,ALL ASEL,S,AREA,,3 AATT,2,,1,0 MAT,2 AMESH,ALL$FINISH ！----------------------加載------------------------------------- /sol ANTYPE,TRANS AUTOTS,1 TINTP,0.005,,,1,,, LNSRCH,1 TRNOPT,FULL TIMINT,ON TUNIF,20 NROPT,FULL ESEL,S,ELEM,,1,(LTH_MD/LTH_E)*NA,1 EKILL,ALL NSLE,S D,ALL,,20,,,,TEMP TIME,T_I NSUBST,10 LSEL,S,LINE,,5 SFL,ALL,CONV,13,,25 LSEL,S,LINE,,9,10,1 SFL,ALL,CONV,13,,25 ESEL,S,ELEM,,1,DERTAX,1 EALIVE,ALL NSLE,S DDELE,ALL SFE,ALL,,CONV,2,hflux_cons ALLSEL EQSLV,ICCG SOLVE FINISH /sol ANTYPE,,REST T=T_I*2 TIME,T NSUBST,10 AUTOTS,1 TINTP,0.005,,,1,,, LNSRCH,1 ESEL,S,ELEM,,1,DERTAX*2,1 EALIVE,ALL NSLE,S DDELE,ALL SFE,ALL,,CONV,2,hflux_cons ALLSEL OUTRES,ALL,ALL EQSLV,ICCG SOLVE T=T+T_I FINISH /sol ANTYPE,,REST *DO,I,YXRZ+DERTAX,(LTH_MD/LTH_E),DERTAX TIME,T NSUBST,10 AUTOTS,1 TINTP,0.005,,,1,,, LNSRCH,1 ESEL,S,ELEM,,I-DERTAX+1,I,1 EALIVE,ALL NSLE,S DDELE,ALL SFE,ALL,,CONV,2,hflux_cons ESEL,S,ELEM,,I-(YXRZ+DERTAX)+1,I-YXRZ,1 SFE,ALL,,CONV,,13 SFE,ALL,,CONV,2,25 ALLSEL OUTRES,ALL,ALL EQSLV,ICCG SOLVE T=T+T_I *ENDDO FINISH@wuming524 |
回復此樓» 猜你喜歡
274求調劑0856材料化工
已經有3人回復
-
材料工程085601調劑求老師收留
已經有10人回復
-
288求調劑
已經有18人回復
-
接受26屆調劑生
已經有22人回復
-
311求調劑
已經有4人回復
-
一志愿北京化工大學材料與化工296分求調劑
已經有16人回復
-
290求調劑
已經有8人回復
-
伙伴們，祝我生日快樂吧
已經有3人回復
-
深圳大學碩士招生（2026秋，傳感器方向，僅錄取第一志愿）
已經有6人回復
-
一志愿河海大學085900土木水利專碩279求調劑不挑專業
已經有3人回復
» 本主題相關商家推薦: (我也要在這里推廣)
9樓2020-05-14 23:51:03
2樓2020-05-12 21:52:27
121100220
捐助貴賓 (初入文壇)
- 應助: 0 (幼兒園)
- 金幣: 83.2
- 帖子: 9
- 在線: 3.1小時
- 蟲號: 15855106
- 注冊: 2019-08-06
- 專業: 高分子材料的加工與成型
3樓2020-05-13 10:36:42
121100220
捐助貴賓 (初入文壇)
- 應助: 0 (幼兒園)
- 金幣: 83.2
- 帖子: 9
- 在線: 3.1小時
- 蟲號: 15855106
- 注冊: 2019-08-06
- 專業: 高分子材料的加工與成型
4樓2020-05-13 10:37:26
| 最具人氣熱帖推薦 [查看全部] | 作者 | 回/看 | 最后發表 | |
|---|---|---|---|---|
|
[考研] 一志愿浙江大學0856材料與化工求調劑 +3 | yansheng@211 2026-03-09 | 4/200 |
|
|---|---|---|---|---|
|
|
[考研] 材料工程330分求調劑，一志愿985 +4 | 小材化本科 2026-03-07 | 4/200 |
|
|
[考研] 311求調劑 +3 | 牛乳糖的卡卡 2026-03-10 | 3/150 |
|
|
|
[考研] 0856材料與化工309分求調劑 +4 | ZyZy…… 2026-03-10 | 4/200 |
|
|
|
[考研] 一志愿東北大學080500，英一數二343分求調劑 +8 | Seele_v5 2026-03-04 | 8/400 |
|
|
|
[考研] 材料專碩調劑 +7 | 慕辰123 2026-03-05 | 10/500 |
|
|
|
[考研] 0817一志愿蘇州大學280復試調劑 +9 | kk扛 2026-03-07 | 9/450 |
|
|
|
[基金申請] 面上項目還需要AI說明嗎？ +3 | liyundong 2026-03-08 | 3/150 |
|
|
|
[考研] 數二英二309分請求調劑 +3 | dtdxzxx 2026-03-09 | 4/200 |
|
|
|
[考研] 070300化學求調劑 +5 | 撲風鈴的貓 2026-03-08 | 10/500 |
|
|
|
[考研] 求0856調劑 +5 | 小力氣珂珂 2026-03-08 | 5/250 |
|
|
|
[考研] 一志愿武理314求調劑 +4 | （￣～￣;） 2026-03-08 | 5/250 |
|
|
|
[考研] 材料調劑 +7 | ounce. 2026-03-05 | 15/750 |
|
|
|
[考研] 301求調劑 +5 | 一二LV 2026-03-07 | 5/250 |
|
|
|
[考研] 求調劑，不管什么專業，我是可塑造的人才一枚，希望遇到知己老師撈撈我 +4 | 13102137290 2026-03-06 | 5/250 |
|
|
|
[考研] 0307化學求調劑 +6 | 0ok0k 2026-03-07 | 6/300 |
|
|
|
[考研] 2026調劑】考試A區0703化學類323分 誠求接收 +3 | 卷柏卷柏 2026-03-05 | 4/200 |
|
|
|
[考研] 282求調劑 +7 | 夕～日 2026-03-05 | 8/400 |
|
|
|
[考研] 材料085601一志愿哈工大317 +4 | 壓迫感行 2026-03-04 | 4/200 |
|
|
|
[考研] 085602 293分求調劑 +3 | SivanNano. 2026-03-05 | 3/150 |
|